Guide updated 6 November 2026

Moon Sweepers Packager Guide

Set up a short delivery route, follow the first capsule and check the depot before extending your belt.

By ArcadeWiki Editorial Team

Conceptual route from a hand tool through a Packager and conveyor to a depot intake
Conceptual delivery route, not an in-game layout. Check port locations and connections in your game.

Moon Sweepers Packager: setup and first delivery

Quick answer: use a Packager to load collected dust near your work area and send capsules toward the depot by conveyor. It shortens repeated carrying trips; a working output route is part of the purchase.

Several guides report a $50 Building Tool and a $100 Packager under Logistics; check both prices and availability in your build. The Packager handles dust you bring to it: it is not a brush or a processing machine. Once the route works, compare the robot and processing layouts before adding equipment.

  1. Equip the Building Tool and find the Packager in Logistics. Place it close to the area you are sweeping, with room for a belt at its output.
  2. Connect the output to a conveyor leading to the station's receiving intake. Check each segment's direction and connection.
  3. Collect a small load, approach the Packager and use its interaction prompt. Guides report E by default; use your displayed binding.
  4. Watch the first capsule leave, travel along the belt and reach the intake. Compare the depot display and balance before extending the line.
Moon Sweepers Logistics menu with Packager selected beside Merger and Splitter
Reference menu screenshot: the displayed $100 price belongs to that session. Check your current build. Tpose Gaming.

Packager, Auto Packer or manual delivery?

Manual deliveryPack a capsule and carry it yourself. Useful while the station is close and you are learning the intake.
Auto Packer upgradeReported to make a capsule when the handheld container fills. The capsule still needs to be collected or transported.
Packager structureReported to accept dust from your tool and send capsules onto its connected output belt. It does not sweep or sell the dust itself.

Check the first capsule

  1. Before loading: note the balance, make sure your tool contains dust, and leave space for the outgoing belt. Reference guides identify the output at the rear; verify the port and direction in your build.
  2. At the Packager: use the shown loading prompt and watch the tool gauge decrease. Guides report that capsules may leave over time, so allow the first one to appear.
  3. At each hand-off: watch the capsule move along every section. At a junction, check that the destination branch is connected and not blocked.
  4. At the depot: watch the capsule enter the intake and compare the screen and balance. Patch 1.0.3 says dust and stone arriving by belt are paid as they arrive.

Plan for the Building Tool, Packager and the full belt, not just the machine price. Check the cost and build menu in your save; different guides give incomplete or inconsistent information about power and other requirements.

Moon Sweepers Packager showing Loaded 12 kg beside the player's cleaning tool
The reference screen shows Loaded 12 kg. Loaded material alone does not confirm that a capsule reached the depot. Tpose Gaming.

Locate the first failed step

Use this diagnostic sequence on one short route. Change one connection at a time and repeat the same small-load test, so you can tell which change helped.

What you observeNext checkWhat confirms progress
The tool still holds its dustRead the loading prompt and confirm you are interacting with the Packager.The tool gauge decreases or the machine's loaded amount changes.
Material is loaded but nothing leavesInspect the output connection and any machine message before changing the whole belt.A capsule appears on the connected output.
A capsule stops partwayInspect the first stopped join, direction or downstream machine.The next test capsule passes that exact point.
The last belt moves but no sale registersFollow the capsule into the receiving intake and compare the depot display with your balance.The intake accepts the capsule and the delivery registers.

Keep a useful test record

Note the game version, solo or co-op session, starting balance, loaded amount and the first place movement stops. Capture the machine message and both ends of the connection. Avoid simultaneous purchases or other deliveries while comparing balances; they can hide the result of your test.

These setup steps combine reference-guide reports with the developer's patch notes. They have not been independently play-tested; check your build and on-screen prompts. For a stopped line, see the conveyor troubleshooting checklist.